8
EXIT TRIM
Rim – w/o key override 2103 98TP, 99TP, 98L, 99L 8828, 8863, 8866
Surface Vertical Rod – w/o key override 2203 9827TP, 9947TP, 9827L, 9927L N/A
Concealed Vertical Rod – w/o key override 2703 9847TP, 9847TP, 9847L, 9947L N/A
Rim – with key override 2103 98TP, 99TP, 98L, 99L N/A
Surface Vertical Rod – with key override 2203 9827TP, 9947TP, 9827L, 9927L N/A
Concealed Vertical Rod – with key override 2703 9847TP, 9947TP, 9847L, 9947L N/A
Device Type Precision Von Duprin Sargent
2000 98/99 8800
EXIT TRIM — COMPATIBILITY CHART
Materials: Internal parts are brass, zinc, or corrosion-treated steel.
Escutcheons: 10 5/8” (295mm) H x 3 5/16” (84mm) W x 1” (25mm) D. (1” (25mm) at the top,
sloping down to 3/4” (19mm) at the bottom)
Door thickness: Standard lock configuration designed for doors 1 3/4” (44mm) – 2 1/4”
(57mm) thick.
Lever handle: Brass, bronze, or stainless steel base material. Lever styles 14 and 15 return
to a minimum of 1/2” (12mm) of door surface.
Finishes:
606 – satin brass, clear coated
613* – oxidized satin bronze, oil rubbed
626 – satin chromium plated (brass base material)
690** – dark bronze coated (brass base material)
Antimicrobial finishes:
626AM – Satin Chrome Plated with UltraShield
™
Antimicrobial coating
630AM – Satin Stainless Steel with UltraShield
™
Antimicrobial coating
* 613 finish is designed to wear over time, providing an “antique” appearance.
** 690 finish will continue as a dark brown appearance over time.
Exterior trim assembly compatible to exit hardware from
Precision
™
, Von Duprin
™
, or Sargent
™
8000 rim device.
• Provides online lock capabilities for applications where building code requires exit hardware
• Exit trim comes standard with Door Position Switch (DS). It also comes with
lead wires to connect to an optional Request-to-Exit (RQE) switch and an optional
latch position switch available with the Precision line of exit devices.
• Request-to-Exit (RQE) & Latch Position Switch (LS) not available on Precision mortise
• The actual Request-to-Exit (RQE) & Latch Position Switch (LS) are never
included with the EXQ trim. Those switches must be purchased separately.
• All EXQ trim must be installed by a Stanley
®
Certified
Technician or warranty will be voided
• Exit hardware sold separately
See page 6 for certification descriptions.
EXIT TRIM
Latchbolt operated by:
• Outside key
• Outside lever-unless locked by internal motor drive
mechanism
• Touchbar
Outside lever locked by:
• Internal motor drive mechanism operated by
time-activated electronic signal
Outside lever unlocked by:
• Internal motor drive mechanism operated by
time-activated electronic signal or by valid card/PIN
Inside hardware is always unlocked
EV
With key
override
EXIT TRIM — FUNCTIONS
U
ltra
S
hield
™
EXQ
Magnetic Stripe Reader
WIRELESS ACCESS SOLUTIONS
Comments to this Manuals